收藏本站
...the world's most energy friendly microcontrollers
11.3.1 System Clocks
11.3.1.1 HFCLK - High Frequency Clock
HFCLK is the selected High Frequency Clock. This clock is used by the CMU and drives the two
prescalers that generate HFCORECLK and HFPERCLK. The HFCLK can be driven by a high-frequency
oscillator (HFRCO or HFXO) or one of the low-frequency oscillators (LFRCO or LFXO). By default the
HFRCO is selected. In most applications, one of the high frequency oscillators will be the preferred
choice. To change the selected HFCLK write to HFCLKSEL in CMU_CMD. The HFCLK is running in
EM0 and EM1.
11.3.1.2 HFCORECLK - High Frequency Core Clock
HFCORECLK is a prescaled version of HFCLK. This clock drives the Core Modules, which consists of
the CPU and modules that are tightly coupled to the CPU, e.g. MSC, DMA etc. This also includes the
interface to the Low Energy Peripherals. Some of the modules that are driven by this clock can be clock
gated completely when not in use. This is done by clearing the clock enable bit for the specific module
in CMU_HFCORECLKEN0. The frequency of HFCORECLK is set using the CMU_HFCORECLKDIV
register. The setting can be changed dynamically and the new setting takes effect immediately.
Note
Note that if HFPERCLK runs faster than HFCORECLK, the number of clock cycles for each
bus-access to peripheral modules will increase with the ratio between the clocks. Please
refer to Section 5.2.3.2 (p. 18) for more details.
11.3.1.3 HFPERCLK - High Frequency Peripheral Clock
Like HFCORECLK, HFPERCLK is also a potentially prescaled version of HFCLK. This clock drives
the High-Frequency Peripherals. All the peripherals that are driven by this clock can be clock gated
completely when not in use. This is done by clearing the clock enable bit for the specific peripheral in
CMU_HFPERCLKEN0. The frequency of HFPERCLK is set using the CMU_HFPERCLKDIV register.
The setting can be changed dynamically and the new setting takes effect immediately.
Note
Note that if HFPERCLK runs faster than HFCORECLK, the number of clock cycles for each
bus-access to peripheral modules will increase with the ratio between the clocks. E.g. if a
bus-access normally takes three cycles, it will take 9 cycles if HFPERCLK runs three times
as fast as the HFCORECLK.
11.3.1.4 LFACLK - Low Frequency A Clock
LFACLK is the selected clock for the Low Energy A Peripherals. There are three selectable sources
for LFACLK: LFRCO, LFXO and HFCORECLK LE /2. In addition, the LFACLK can be disabled. From
reset, the LFACLK source is set to LFRCO. However, note that the LFRCO is disabled from reset. The
selection is configured using the LFA field in CMU_LFCLKSEL. The HFCORECLK LE /2 setting allows
the Low Energy A Peripherals to be used as high-frequency peripherals.
Note
If HFCORECLK/2 is selected as LFACLK, the clock will stop in EM2/3.
Each Low Energy Peripheral that is clocked by LFACLK has its own prescaler setting and enable bit.
The prescaler settings are configured using CMU_LFAPRESC0 and the clock enable bits can be found
in CMU_LFACLKEN0. Notice that the LCD has an additional high resolution prescaler for Frame Rate
Control, configured by FDIV in CMU_LCDCTRL. When operating in oversampling mode, the pulse
counters are clocked by LFACLK. This is configured for each pulse counter (n) individually by setting
PCNTnCLKSEL in CMU_PCNTCTRL.
2011-04-12 - d0001_Rev1.10
95
www.energymicro.com
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*
相关PDF资料
EFM32GG-STK3700 KIT STARTER GIANT GECKO
EFM32LG-DK3650 KIT DEV EFM32 LEOPARD GECKO
EK-K7-KC705-CES-G-J KINTEX-7 FPGA KC705 EVAL KIT
EK-S6-SP601-G KIT EVAL SPARTAN 6 SP601
EK-S6-SP605-G KIT EVAL SPARTAN 6 SP605
EK-V6-ML631-G-J VIRTEX-6 HXT FPGA ML631 EVAL KIT
EK-V7-VC707-CES-G VIRTEX-7 VC707 EVAL KIT
EK-Z7-ZC702-CES-G ZYNQ-7000 EPP ZC702 EVAL KIT
相关代理商/技术参数
EFM32GG230F1024 功能描述:ARM微控制器 - MCU 1024KB FL 128KB RAM RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT
EFM32GG230F1024G-E-QFN64R 功能描述:IC MCU 32BIT 1MB FLASH 64QFN 制造商:silicon labs 系列:Giant Gecko 包装:剪切带（CT） 零件状态:在售 核心处理器:ARM? Cortex?-M3 核心尺寸:32-位 速度:48MHz 连接性:I2C，IrDA，智能卡，SPI，UART/USART 外设:欠压检测/复位，DMA，POR，PWM，WDT I/O 数:56 程序存储容量:1MB（1M x 8） 程序存储器类型:闪存 EEPROM 容量:- RAM 容量:128K x 8 电压 - 电源（Vcc/Vdd）:1.98 V ~ 3.8 V 数据转换器:A/D 8x12b，D/A 2x12b 振荡器类型:内部 工作温度:-40°C ~ 85°C（TA） 封装/外壳:64-VFQFN 裸露焊盘 供应商器件封装:64-QFN（9x9） 标准包装:1
EFM32GG230F1024-QFN64 制造商:Energy Micro AS 功能描述:GIANT GECKO MCU - Cut TR (SOS) 制造商:Energy Micro 功能描述:GIANT GECKO MCU 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 1MB FLASH 64QFN
EFM32GG230F1024-QFN64T 制造商:Energy Micro AS 功能描述:GIANT GECKO MCU - Trays
EFM32GG230F1024-QFN64-T 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 1MB FLASH 64QFN
EFM32-GG230F1024-SK 制造商:Energy Micro AS 功能描述:GIANT GECKO SAMPLE KIT - Bulk
EFM32GG230F1024-T 制造商:Energy Micro AS 功能描述:IC MCU 32BIT 1MB FLASH 64QFN
EFM32GG230F512 功能描述:ARM微控制器 - MCU 512KB FL 128KB RAM RoHS:否 制造商:STMicroelectronics 核心:ARM Cortex M4F 处理器系列:STM32F373xx 数据总线宽度:32 bit 最大时钟频率:72 MHz 程序存储器大小:256 KB 数据 RAM 大小:32 KB 片上 ADC:Yes 工作电源电压:1.65 V to 3.6 V, 2 V to 3.6 V, 2.2 V to 3.6 V 工作温度范围:- 40 C to + 85 C 封装 / 箱体:LQFP-48 安装风格:SMD/SMT